Disclosure: This article may contain affiliate links to products. We may receive a small commission for purchases made through these links at no added cost to you. Read full disclosure here.
If you tend for a succulent plant, then there will be a time that you will consider an alternative light source for your plant.
This article is meant to be a guide to help you choose the best grow light for succulents.
Here, we review a list of 10 grow lights that you can’t go wrong with selecting one of them for your plant.
As you proceed, you may want to see this best selling grow light with a thousand plus of customer reviews on Amazon. Check out this succulent grow light on Amazon.
If you know anything about tending succulents, then you’re likely aware that they don’t fare well outdoors when winter comes around.
As temperatures drop and the freezing condition encroaches, they get far less sunlight than they need to stay healthy and may suffer from frost.
If you exposed the plant for too long, they could die.
That’s why people who grow succulents are advised to keep their plants indoors during the cold months. And if they believe that the plants won’t get enough sunlight there, they can use artificial grow lights as a substitute.
In case you’re not familiar with the terms ‘succulent’ or ‘grow light’ we’ll romp through brief definitions for them now.
What Are Succulents?
Succulents are a group of plants that tend to have thick leaves and fleshy parts. They are entirely dependent on sunlight as well. But they are resilient in drought conditions.
Some well-known succulents include the jade plant, Echeveria, viper’s bowstring hemp, and Aloes.
What are Grow Lights?
Grow lights are artificial lights used as supplements or substitutes for natural light (sunlight). Gardeners tend to prefer either white fluorescent or LED glow lights.
There are numerous types and brand options belonging to the two categories we’ve just mentioned. You may find it hard to choose from what’s available, even if you’ve picked either a LED or fluorescent for your plants. We’ll compare these two choices later in this article.
However, we’ll be focusing on some of the best LED grow lights you can do. If you want something that saves you a lot of energy and gives the best non-natural boost to photosynthesis within your reach, you should be thinking about getting LED lights.
Best Grow Lights for Succulents Review
Here are our picks for best grow lights for your succulents.
Ankace 40W is one of the best-known grow-lights on the market. It’s not hard to see why so many people love it.
First, it’s got two heads (literally), each with blue and red lights, as you’ll find with most LED grow lights. It’s light with these hues that plants use in photosynthesis (they ‘reflect off’ green color lights, which explains the green color most of them take on).
The color combinations- 12 blue and 24 LED chips –are positioned to boost plants’ energy intake and germination.
The manufacturers know that you’re going to be moving the light about a bit to focus it differently at various times.
So they’ve made these dual heads stand on flexible goosenecks.
The flexible gooseneck also means you only need to turn the necks to redirect the lights to plants (or parts of the plants) that require more illumination.
You can switch between this product’s five lighting modes, and change the brightness or dimness as you see fit.
There’s a timing mode as well, that lets you set it to stay on for three, six, or twelve hours, as you choose.
Finally, this lamp has a USB connector with which you can plug it into a power source.
You can deploy it within a greenhouse or in a transparent enclosure containing your plants, whether they are in your home or office.
The Roleadro grow light takes a very different form from the desk lamp-like build of the Ankace dual light.
It does have blue and red LED lights, and The lights are placed on an aluminum cooling plate.
You can hang the plate above your plants with a hanging bracket.
The blue and red chips are fixed in small ‘heat sinks’ in the plate; the manufactures say this set up lets the heat from them dissipate more efficiently.
Each chip emits light in the 380nm-800nm full spectrum, which closely matches what you’d get from sunlight.
Experts recommended that you hang this light between 12”-48” from the plant to achieve the best possible results.
This product could last you 50,000 hours, according to its parent company. That claim means you’ll be using it for many, many years if you handle it with care.
A package of one of these also contains a power cord, power adapter, hanging kit, and an instruction manual.
This one has three light heads carried by individual goosenecks.
You can hold the Goosenecks on a clamp- base. It has 39 red LED chips, and 21 blue LED chips or a total of 60 light-emitting chips.
You can choose any of the six dimmable options to adjust the brightness or dimness of the lighting.
An auto on-off feature lets you set it to turn off after three, six, or twelve hours of functioning. If you don’t reset it to come on at a different time or duration, it will merely carry on switching on and off at the exact time and interval you’ve initially set.
The recommended between the light and plants is 11”-20”. It becomes functional when it’s connected to a power source through its adapter.
There’s a 12-month warranty on this product, just-in-case it turns out faulty. But if it’s okay (as it is most of the time), you can expect it to last you a very long time.
It’s hard to bet against 250 LED beads getting the plant lighting job done. That’s the sort of light power the Shengsite glow light boasts. This number, made up of 186 red and 64 blue LED beads, is implanted in a circular aluminum disc. When it’s hung up above your succulents, it should give them a spread of brightness that’s fair and reinvigorates.
If you’re using this, you should hang it at a distance of 8”-20”, depending on the maturity of your succulent. You can hold the plant closer to younger plants.
This lamp has a lifespan of about 50,000 hours, so it won’t die for a long while after you’ve purchased it (if all goes well).
The Relassy grow lamp yields illumination with similar properties to sunlight.
The distribution of its LED chips is somewhat different from the previous lamps we’ve reviewed thus far; with it, the emphasis seems to be on delivering uniform light as opposed to just simple combinations of red and blue lights.
It’s a dual headlamp with 18inch goosenecks, so coverage and precision shouldn’t be problems you have when using it.
Plus, there’s a clamp base that makes it easy to maintain the lamp in a fixed position.
The clamp can adjust between 0.3 to 3.0 thickness, good enough for a more significant percentage of desks.
For a product powered by 20 watts of electricity, this lamp delivers a good deal of light (as you can expect from most LED bulbs).
The Duomishu light has an auto on-off functionality with durations slightly different from the ones we’ve discussed thus far.
They can be set to turn off after 4 hours, 8 hours, or 12 hours.
The lamp will continue to run with the settings you choose until you change them.
The base is a clamp, a popular design for a lot of these products. It allows you to attach it to surfaces of various ranges of thickness.
You can also select one or two bulbs to work if you don’t want all three to function at once.
The glow comes from red and blue LED circles in three transparent light bars. Brightness can be adjusted to eight different degrees, to suit the needs of your succulent.
As with other lamps of its kind, this comes with goosenecks that lend the heads and the light they emit to easy and quick adjustment.
Here’s another three-bar lamp for your succulents.
The necks for this one are bendable up to 360 degrees. The light bars which they hold are rotatable.
They contain a total of 60 LED chips placed in a manner that allows for quick heat dissipation.
If you want, you could increase or reduce the brightness of the light you’re using.
It could be anywhere between 20% or 100% bright; there’s room for changing to 40%, 60%, or 80% brightness as well.
The clips can open wide enough to attach to 3-inch thick surfaces.
The timer function is also available, so you can set the lights to come on and off at designated times and to last for a specific number of hours. You’ll appreciate this best when you have to go on a vacation but need your succulents well lit in your absence.
You can power the lamp via a USB cord, so it’s okay for an office environment, just as it is for a home setting.
The Juhefa glow light is a panel implanted with 75 LED chips. That number includes white, ultraviolet, and infrared rays.
While the red and blue lights help with the usual photosynthetic needs of the plants, the ultraviolet helps to sterilize them.
The white bulbs also aid photosynthesis and increase the temperatures when things get a bit cold.
You might get the impressions that some of the lights- particularly those around the middle –aren’t functioning correctly.
But they’re fine.
The infrared and ultraviolet are usually dim because gardeners will only need little amounts of them.
The recommended distance between this lamp and your plant is 8”-30”.
Gardeners who prioritize energy savings may want to have a look at this too.
It doesn’t take a lot of power to run, so it doesn’t demand much from your batteries.
The light given by a single unit of this lamp should be enough for a small group of young or growing plants.
This lamp has two bars that contain a total of 40 full-spectrum LED chips.
It has most functions you can expect from a grow light, It has automatic timers that let you dictate how long the lights stay on for (3,9 or 12 hours). The flexible gooseneck arms is meant to help you change the reach of the illumination. Also, there is a clip base that makes the lamp attachable to many surfaces. You’re almost spoilt for choice with this light’s dimming options- there are nine of them.
You can adjust the settings on its remote control system to have only red or blue lights on or have both on at once. You can even have the lights on or off on only one of two heads.
Plug the lamp to a power source with its USB cable and adapter, and it’ll be ready to go.
Not all LED grow lights give you that slightly disorienting purplish hue.
This one doesn’t. It provides a white light akin to daylight, and it achieves excellent results when used as a supplement to what the sub provides on less bright days.
The structure of this bulb is quite different too.
It’s made partly of ceramic and is hollowed out to allow heat dissipate efficiently.
The LED chips are placed at the right end of the beam.
They emit wavelengths that include green, red, blue, and ultraviolet lights as well. The bulb fits into a lamp socket, so you won’t have to bother with setting it up.
For satisfactory performance, consider setting the light about 12”-39” above the plant; its manufacturers suggest that a 3.6 feet coverage area is ideal.
Don’t touch the ceramic body immediately after you’ve used it. You don’t have to do this because it’ll remain heated for a while after the electricity is turned off.
If your product acts up through no fault of yours, you could contact the producers to help you with it. They’ve placed an impressive five-year warranty on it, which should cover most factory faults that might show up.
Pro-tips From Indoor Plant Growing Expert-Ben Thorton
Ben Thorton who is an expert on indoor plant shared some tips needlesandleaves.net that will be helpful to succulent lovers.
According to Thorton, it is important you consider how bright a grow light emits. this is because succulents need a light that emits at least 2000 lumens for each square foot of light.
If you provide your succulents such amount of light for at least 14 hours in a day, that will almost equate the same amount of light exposure that the plant will receive during the summer.
On the best light color temperature for a succulent plan t, Expert observed that succulent tend to thrive in color temperature that is not below 5000K. This is because lights that are above 5000K gives out cool and full-spectrum light that is close to what is gotten from natural sunlight.
How High from the Plant Should I Hang my Grow Light
One important aspect of lighting for succulent is being knowledgable on the perfect height to place your artificial grow light.
When using your LED grow light, you need to place it where it can provide sufficient light for the plant without having the plant being burnt from the excess heat that the grow light might be emitting.
Thorton recommends that you put grow light at least 6 to 8 inches above the succulent. Because it will drastically reduce the chances of your grow light damaging your plant. n
Can Succulent Grow in Fluorescent Light?
The simple answer to this is yes. But there’s a lot more you might need to know besides this.
Fluorescent grow lights have been around much longer than LED alternatives. Closer to recent times, there’s been an improvement in their quality, and many plant growers are comfortable with sticking with them.
One reason for this is that fluorescent white tends to closely match the color of sunlight, which suits plants well.
Another is that they are easier on the eyes than LED lights. But as we’ve seen with the SANSI product we reviewed, there are LED white grow lights too.
But you have to ensure that you do not place the fluorescent light too close to your plants. They are known to be great heat producers and may burn your succulents if you keep the light too close to the plant.
Burning your lovely succulent is something that will not happen is you choose the best grow lights for succulent available on the market. That is why LED lights perform better at this because they emit less heat.
Still, you could fancy fluorescent if you’re leaving your plants on a counter or some other open place in your home or office.
If you’re using a greenhouse or some other kind of enclosed box, you can fix LED lights.
This way, you won’t have to trouble your eyes with the unusual red, blue, or purplish hues they produce.
Can Succulents Live Without Sunshine?
They can, at least for a while. But there will be consequences.
A few species can get by with little light. But for the majority, a shortage of light causes them to etiolate. In other words, they get stretched and become elongated.
If you placed the succulent close to a light source, they would grow in their direction. For example, if you keep the plant close to a window that lets sunlight in, they will also grow towards it.
In the end, even the most resilient plants will die if they go long enough without any light. When the dark conditions are accompanied by freezing, they will fail even faster. You can keep them alive with the right kind of artificial light and a reasonable degree of warmth.
Succulents are resilient and do surprisingly well in unfriendly environments. But if you’re growing some of them yourself, you may have to help them out with the best grow light around, especially when things get dim and frosty.
The options we’ve provided here should help you keep them healthy and glowing for as long as they are needed.
I hope our properly research article on the best grow light for the succulent plant has so far been handy in your selection and buying journey.